Our team prepares the materials as well as the equipment and tools required for the job. Some of the tools and equipment we use include:

• Broom
• A Vacuum Cleaner
• Brushes (hard)
• Hose
• Gloves
• Protective gear
• Rollers and paintbrushes
• Degreaser
• Plastic cover
• Epoxy floor kit
• Tape

Next up: the professional application process.

Grease Removal 

First, you have to clean and remove the grease from the floor. Do this using a vacuum cleaner and broom. You can remove the grease thoroughly using a brush and the designated degreaser. Rinse everything with a hose and leave it to dry.

Etching

The next step would be etching the floor. Your kit comes with a solution to use for this procedure. Make sure to follow instructions when applying the solution. Mix it with water according to the instructions and pour it onto the floor.

It should form foams that will start to even out the surface. As before, you should wash the entire region methodically with a backyard hose. Note that while you are letting it dry, it may take quite a long time. Just be prepared to wait it out.

Put on the Necessary Safety Gear

It would also help you to put on the necessary protective gear when doing the etching process. Put on long sleeves and avoid skin-solution contact during the process. The mixtures are typically watered down muriatic acid so it would be dangerous to apply the solution topically onto your body.

It would be wise to put on masks as well while working on the application process.

Prepare the Garage

The next step would be to prepare the garage that you’re going to treat. You can do this by putting the tapes below the garage wall. Consider using plastic sheeting on the floors as well. This will prevent excessive epoxy from dripping onto the walls and floors unnecessarily.

Prepare the Solution

After this, you can mix the epoxy as instructed. It’s composed of a resin and a hardener. Make sure to blend the paint slowly before adding the hardening solution. This way, you will increase the potency of the mixture and ensure that you will get the best results in terms of quality for your garage floor.

After mixing, position the lid back on the container and wait for a certain period of time, depending on the instructions of the manufacturer. It will also depend on certain temperatures as well as the color that you are going to use.

Place the Solution

Next, you can now apply the epoxy as instructed. Remember that you’ll have a maximum of 2 hours for the application. This may decrease depending on the weather. You have to be careful but efficient when doing the application.

Yes,

It would also help you to make sure that the room remains well ventilated to roll the process. Make sure to use the brushes accordingly when applying this solution. You should also use the appropriate roller length to spread the epoxy onto the floor equally.

Depending on the size of the garage floor, it would be faster to do this with help so it would be best for you to plan the project out before you begin.